VCM-CN in Non-Explosion Proof Enclosure
MPS’ model for periodic “Route Type” Readings (monthly, weekly or daily). Applicable to Utility, Industrial, Hydro and all Rotating Machinery where snap shots of shaft current and shaft voltage on one unit is required.
Measuring shaft voltages accurately and consistently the same way every time is necessary for reliable maintenance of shaft grounding devices, and for trending of shaft voltages and currents. Readings taken with conventional meters are often misleading. These meters are intended to read alternating currents such as in electronic devices and power systems. The nature of stray currents and voltage signals is more like powerful noise, so spikes and voltage peaks; that can be injurious to the machine, are missed completely.
Use of an oscilloscope can produce voluminous and widely diverse traces with various interpretations. The VCM-C provides an easy, consistent measurement procedure to ensure that accurate, reliable and consistent weekly/daily route type readings are taken every time.
- Easy to use
- Accurate
- Reliable
- Consistent measurement procedure
- Consistent weekly/daily route type readings
| MPS Voltage Current Monitor Model-C Common Specifications | |||
| Input: | PLEASE NOTE: MPS VCM-Cs will operate with any Vendor’s Shaft Grounding Device Ground Current Lead (from grounding device circuit). | ||
| Output: | Local display on 3.5 digit LCD indicating Peak or Average Brush Currents, or Peak Ungrounded Shaft Voltage plus Power and Circuit Check. All are selected by a rotary switch. | ||
| Maximum Current: | 20 Amps Peak Current and 2.0 Amps Average Current. | ||
| Maximum Voltage:: | 600 Volt Spikes | ||
| Overload LED: | Indicator lights when shaft current has exceeded measuring capabilities. | ||
| Operating Temp:: | -10°C to 50°C (14°F to 122°F) | ||
| Storage Temp: | -40°C to 60°C (-40°F to 140°F) | ||
| Relative Humidity: | 0% to 95%, non-condensing | ||
| Power Requirements: | Single, standard 9 Volt Alkaline battery (MPS supplied) | ||
Options:
(Requires Custom Quotation)
|
|
|
Note:
* Selected Shaft Grounding/Earthing Devices need to be electrically isolated for signal measurement through MPS VCM-E’s.
**Shaft Grounding/Earthing Devices can be purchased separately (i.e. one device for voltage readings and one for shaft grounding).
Technology Protected under US and International Patents
Order Codes:
VCM CN
Dimensions:
Height:: 7.5 in. (190.5 mm)
Length: 6.75 in. (171.45 mm)
Width: 5.3 in. (134.62 mm)
Weight 3.5 lbs. (1.6 kg)